Đăng nhập
 
Tìm kiếm nâng cao
 
Tên bài báo
Tác giả
Năm xuất bản
Tóm tắt
Lĩnh vực
Phân loại
Số tạp chí
 

Bản tin định kỳ
Báo cáo thường niên
Tạp chí khoa học ĐHCT
Tạp chí tiếng anh ĐHCT
Tạp chí trong nước
Tạp chí quốc tế
Kỷ yếu HN trong nước
Kỷ yếu HN quốc tế
Book chapter
Bài báo - Tạp chí
36 (2017) Trang: 1466-1473
Tạp chí: Environmental Progress & Sustainable Energy

Waste materials have traditionally been discarded in landfills and often dumped directly into ecosystems without adequate treatment. However, possible reuse and recycling alternatives should be investigated and implemented. Recent environmentally friendly approaches have been aimed at achieving sustainable development by conserving natural resources and minimizing the discarding of materials. The objective of the present study was to investigate the hydration characteristics of reduction slag, limestone sludge, stone sludge, and iron-oxide sludge for fabricating four types of eco-cement clinkers. The compound raw materials were burned for 2 h at 14008C to form eco-cement clinkers. The results showed that the major components of ordinary Portland cement (OPC), namely C3S, C2S, C3A, and C4AF, were present in the eco-cement clinkers. The compressive strength development of EcoA pastes (containing 78% limestone sludge, 19.51% stone sludge, and 2.49% iron-oxide sludge) was similar to that of the commercial OPC products. The compressive strength of the EcoD pastes (containing 71% limestone sludge, 19.51% stone sludge, 2.49% iron-oxide sludge, and 7% reduction slag) decreased as the amount of a-C2S increased. Mercury intrusion porosimetry indicated that the pore volume of the pastes gradually decreased with an increase in the curing time. Furthermore, the results of physical-mechanical tests showed that reduction slag, limestone sludge, stone sludge, and iron-oxide sludge can be used as raw materials in cement production at no cost to the producer, thereby reducing the production costs.

 


Vietnamese | English






 
 
Vui lòng chờ...